| After-sales Service: | Offer Technical Support for Whole Life of Machine |
|---|---|
| Warranty: | 12 Months |
| Type: | Weighing-type Filling Machine |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier FILLING MACHINE FOR DRUMS ON PALLET
Model No.: ADF-1200L4
Filling Material: lubricating oil/Resin/ Engine oil etc.
Filling Weight: 200kg/Drum
Filling Capacity: 200L Round Barrel (Four Drums on the same pallet)
Filling Accuracy: ±0.1% F.S. (Accuracy depends on suitable adjustment of slow feeding and the stability and consecutiveness of liquid to spray gun
Filling Speed: 40-60Barrels/hour (Depend on previous speed of feeding material, the previous speed of liquid must be 300L/MIN.)
Measure Method: Two-section Feed Control, Filling into drum on above liquid level
Drum Size: Iron Drum, Small Open Mouth
Material Connector: DN40 Rapid Flange Connector (Pressure of liquid feeding should less than 0.6MPa)
EQUIPMENT DESCRIPTION
Electric Weighing Scale with Roller Conveyor
Weighing Range: 1200kg x200g
Weighing Table Size: 1500mm X1500mm
LOVOSC LP7110 Load Cell for pieces
JB-05 Load Cell junction box
Painted Steel Platform
Roller Conveyor with no motor driven
Weighing Area Size:1500mm(L)x1500mm(W)
Material of Machine Body: Painted Steel
Material of Rollers: Galvanized steel pipe
Roller Size: Φ80mm x150mm Pitch
Conveyor has detent mechanism and switch for moving/ Stop control
Automatic Liquid Filling Machine
Φ1 1/2" FB type Two Stages pneumatic Filling Spray Gun (Material of Spray Gun is SUS 304, Sealing Material: polyvinyl fluoride), Attached Φ1 1/2" rapid connector for feeding material, which used for change material, fast disassemble.
Three-section infeed control, there is a foot valve at head of filling gun to improve filling accuracy and avoid rest of liquid overflow
Gas-collection hood used to collect flue gas, stainless steel 304 material
Offer anti-leak cup, stainless steel 304 material
Manual adjust spray gun height
Equipped with automatic promotion and demotion cylinders
Equipped with base of filling spray gun (Material: Painted stainless steel)
Included Anti-explosion pneumatic parts (pneumatic parts brand is AIRTAC)
Automatic Controller
Wall-hung type Control Box
ST510 Weighing Controller
MCGSTPC TPC7062Ti Operation Interface
FATEK FBS PLC programming control (Including RS232 modular)
Two-section liquid infeed weight control (fast-slow)
Automatic Stop and Alarm when no liquid
Roller Conveyor for empty barrels and finished barrels storing
Roller Conveyor with motor driven
Roller Size: 1500mm(L)x1500mm(W)
0.75KW gear reduction motor
Material of Machine Body: Painted Steel
Roller Material: Galvanized steel pipe
Size: Φ80mm x150mm Pitch
Machine design is based on easy assemble and disassemble, convenient for changing rollers
On weighing conveyor, installed pneumatic brake to avoid barrel move when fill in liquid to barrels
Installation Mode: On Ground
OTHER REQUIREMENT
Buyer should install the machines by themselves and seller can give them guide; quotation doesn't include installation costs.
Buyer should prepare soft pipe and flange to connect with our machines to infeed liquid; Buyer should prepare pump to supply liquid to our machine and it should has reflux device; buyer should prepare separate power source AC380V, 3Phase/AC220V;1Phase; 50Hz; 20A and 4-6kgf/cm2 compressed air.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}